Product package: ( PRISM2-01 ) Sena PRISM 2 Action Camera with Mesh Intercom | 4k Resolution, 20 Megapixels, 120 Frame per Second, IPX7 Waterproof, Bluetooth 5.2, Multiple Mounting Options.
Sena has just launched the PRISM 2 4K Action Camera (PRISM2-01) with Mesh Intercom in the US online. The price starts at $349.00. At the time of writing, Amazon US has listed this model for pre-order, with delivery expected between September 3 and October 5.
Let’s check out the specs and features of this new kid on the block.
Camera
The Sena PRISM 2 features a Sony IMX317 sensor with a 165° field of view and f/2.0 aperture. It supports MicroSD U3 or higher memory cards. There are two touchscreens on this model – a 1.4-inch front touchscreen and a 2.4-inch rear touchscreen.
According to the official specs sheet, this camera offers up to 4 hours of recording time.
Mesh Intercom
One of the main – unique – features of the PRISM 2 Action Camera is its Mesh Intercom 3.0 system. It offers up to 500m (0.3 miles) of range in open terrain.
Open Mesh supports 6 channels with virtually unlimited participants, while Group Mesh supports up to 24 participants.
Audio
The camera supports multi-source audio recording from Mesh Intercom, Bluetooth headsets, and the built-in microphone. Audio is recorded in AAC format at 48kHz stereo, with Advanced Noise Control for noise reduction.
Video
The PRISM 2 (PRISM2-01) supports multiple recording modes, including Video, Timelapse, Loop Recording, and Slow Motion.
Supported video resolutions include:
- 4K @ 30fps
- 2.7K @ 60/30fps
- 1080p @ 120/60/30fps
- 720p @ 120/60fps
Video is recorded using the H.264 codec in MP4 format. Electronic Image Stabilization (EIS) is supported in 4K30fps, 2.7K30fps, 1080p60fps, 1080p30fps, and 720p60fps modes.
The camera offers Super Wide, Wide, Medium, and Narrow field-of-view modes.
Loop recording can be set to 1, 3, or 5 minutes, while Timelapse intervals include 1, 3, 5, 10, 30, and 60 seconds.
Slow-motion recording is supported at 2.7K 60fps, 1080p 120/60fps, and 720p 120/60fps.
Photo
For still photography, the camera supports Single, Burst, Timelapse, and Self-Timer modes.
Photo resolutions include 20MP, 16MP, 14MP, 10MP, 8MP, 5MP, and 2MP.
Burst shooting supports 30, 15, 7, or 3 shots, while the Self-Timer can be set to 2, 5, or 10 seconds.
Connectivity
For wireless connectivity, the PRISM 2 supports Bluetooth 5.2 and Wi-Fi 802.11 a/b/g/n/ac.
Battery
The camera is powered by a 1650mAh lithium-polymer battery. The charging time is approximately 2.5 hours.
The supported charging temperature range is 0°C to 45°C (32°F to 113°F).
General Specifications
The Sena PRISM 2 measures 73 × 50 × 32mm (2.87 × 1.96 × 1.25 inches) and weighs 152g (5.36oz) for the main module.
It has an IPX7 waterproof rating and can operate between -20°C and 55°C (-4°F to 131°F). The supported storage temperature range is also -20°C to 55°C.
The camera has received CE, FCC, IC, KC, J-MIC, SRRC, and UKCA certifications.
Disclaimer: Product prices and availability are subject to change without notice. As an Amazon Associate, we may earn a commission from qualifying purchases made through links on this website, at no extra cost to you. Always read verified customer reviews and buy from trusted sellers.